Mitsubishi Heavy Industries FDUA160AVSAVH Service Manual page 126

■Set OFF timer by clock
Stops the operation of the unit at the set clock time.
1
Tap the Menu button on the TOP screen and select
■Confirm
Useful functions
2
The Set OFF timer by clock setting screen is displayed.
Select a desired time to stop operation (5-min intervals) with the
3
The Zones button is displayed when performing zone settings. Tapping the Zones button makes it possible to perform zone
operation settings t the time of timer working. (The Zones button is not displayed when not performing zone settings. Proceed
a
to step .)
5
4
Tapping the Zones button will transition to the zone operation setting screen. Set No setting / ON / OFF (No setting/OPEN/
CLOSE) for each zone at the time of timer working.
→ → →
No setting ON OFF
Setting No setting will operate in the previous zone state during timer operation.
After the setting, tap the Set button.
The display returns to the previous screen.
5
After the setting, tap the Set button. The display returns to the Timer menu screen.
The Set OFF timer by clock can be operated one day (Once) or every day.
If it is operated everyday, tap the Once / Everyday button to change the display to Everyday .
1
When you tap the button on the Timer menu screen, the contents of the current timer settings are displayed.
■When the warming up is set,
■The Zone button is displayed when performing zone settings. Tapping the Zone button will display the set zone states.
⇒ Timer ⇒
Set OFF timer by clock
▲
125
- -
'21 • PAC-SM-398
.
▼
buttons.
en.