Mitsubishi Heavy Industries FDUA160AVSAVH Service Manual page 124

■Set OFF timer by hour
When the set time elapses, the air-conditioner stops.
1
Tap the Menu button on the TOP screen and select
■Set ON timer by clock
Starts the operation of the unit at the set clock time.
1
Tap the Menu button on the TOP screen and select
Set ON timer by clock
A/C will start at the set clock time.
AM
Once
Next Cancel Set Back
Tap ▲▼ to set clock time & tap [Set].
Set ON timer by clock
Useful functions
2
The Set OFF timer by hour setting screen is displayed.
Select desired hours to stop operation with the
Range of setting time: 1 to 12 hours (at 1-hr intervals)
3
Zones
The button is displayed when performing zone settings. Tapping the
operation settings at the time of timer working. (The
.)
5
4
Zones
Tapping the button will transition to the zone operation setting screen. Set No setting / ON / OFF (No setting/OPEN/
CLOSE) for each zone during timer operation.
→ → →
No setting ON
Setting No setting will operate in the previous zone state at the time of timer working.
After the setting, tap the Set button.
The display returns to the previous screen.
5
After the setting, tap the Set button. The display returns to the Timer menu screen.
Useful functions
2
The Set OFF timer by hour setting screen is displayed.
Select a desired time to start operation (5-min intervals) with the
3
When operating conditions at the start of operation are set, tap the
If operating conditions are not set, tap the
The Set ON timer by clock can be operated one day (Once) or every day.
If it is operated everyday, tap the
4
Set the following operating conditions.
① Warming up ON/OFF (the Main R/C only)
② Operation mode ... ☞5
③ Set temp ... ☞6
④ Fan speed ... ☞7
⑤ Zones ... ☞9
■Warming up setting can be made with the main R/C only.
■Set the operation mode before setting the set temperature.
⇒ Timer ⇒
Set OFF timer by hour
▲ ▼
buttons.
Zones
button is not displayed when not performing zone settings. Proceed to step
OFF
⇒ Timer ⇒
Set ON timer by clock
▲
Next
Set button.
/ Everyday button to change the display to "Everyday".
Once
123
- -
'21 • PAC-SM-398
.
Zones
button makes it possible to perform zone
.
▼
buttons.
button to set operation conditions. (☞4 )