Drain Water Connection; Drinking Water Connection; Electrical Connection - Siemens SN25TI04CE User Manual

a continuous worktop that is
permanently connected to the adjacent
cabinets.
Observe the safety instructions. →
1.
Page 4
Observe the instructions for the
2.

electrical connection.

Check the contents of the package
3.
and the condition of the device.
The required installation dimensions can be found
4.
in the installation instructions.
Level the appliance using the
5.
adjustable feet.
Pay attention to a firm stand.
Install the drain water connection.
6.
→ Page 13
Install the drinking water
7.
connection. → Page 13
Connect the device to the
8.
power.

4.3 Drain water connection

Connect the appliance to a drain
water connection so that the dirty
washing water can be drained away.
Install waste water connection
You will find the necessary steps in
1.
the supplied installation manual.
Connect the drain hose to the
2.
connection nipple of the siphon
using the parts supplied.
Make sure that the drain hose is not
3.
kinked, crushed or tangled.
Make sure that the water is not
4.
prevented from flowing out by a
plug in the waste water connection.
Set up and connectNL

4.4 Drinking water connection

Connect the device to a drinking
water connection.
Install drinking water connection
Remark
¡If you replace the device
use a new water supply hose.
You will find the necessary steps in
1.
the supplied installation manual.
Connect the device to the drinking
2.
water connection using the
enclosed parts.
Observe the technical data.
Make sure that the drinking water
3.
connection is not kinked, crushed
or entangled.
4.5 Electrical connection
Connect the device electrically
Comments
¡Take the safety rules
→ Page 4 in mind.
¡Please note that the
protection system only works when
the device is supplied with power.
Connect the appliance plug of the
1.
connection cable to the
appliance.
Insert the mains plug of the
2.
appliance's connecting cable into
a socket in the vicinity of the
appliance.
The connection data of the device
can be found on the rating plate.
Check the mains plug for tightness.
3.
13