Key Lock Deactivated Run; Interrupting Program; Canceling Program; Switching Off The Appliance - Siemens SN25TI04CE User Manual

Table of Contents

Advertisement

aWhen the device is operated,
flashes on the display. aIn the
event of a power failure, the key
blocking activated.
14.7 Deactivate key lock
Approx. up for 3 seconds
14.8 Interrupt program
Remark:If you open the appliance door
when the appliance is heated up, it is
best to leave the appliance door ajar
for a few minutes and then close it. In
this way you prevent an overpressure
from occurring in the appliance and
the appliance door from springing
open.
1.
impressions.
aThe program is saved
and the device turns off.
Press to continue the program.
2.
14.9 Cancel program
To end a program early or to change
a program that has started, you must
cancel the active program.
Approx. press for 4
seconds.
aAll indicators light up. aOnce the
indicators are off,
"0h:01m" appears on the display
and the remaining water is
pumped out.
aThe program is aborted
and is closed after approx. 1 minute.
14.10 Switch off the device
The instructions for safe use →
1.
Page 10 consider.
2.
Tip:If you touch during the wash cycle
interrupted. When you switch on the
device, the program continues
automatically.
to press.
Press.
button, the running program is
ServiceNL
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sn23hw03keSn23ew27veSn25zi08ceSr25yw 04meSn23ei 27ve

Table of Contents