Related Manuals for Siemens SN25II00TI
Summary of Contents for Siemens SN25II00TI
- Page 1 Dishwasher SN25II00TI User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Folding prongs ....... 21 General information...... 4 Basket heights........ 22 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 4 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 7 Water softening system.... - Page 3 Basic settings........ 33 Declaration of Conformity .... 54 Overview of basic settings ..... 33 Changing basic settings.... 34 Home Connect ...... 34 Home Connect quick start ..... 35 Home Connect settings.... 35 Remote Start ...... 35 Remote Diagnostics ...... 36 Software update ...... 36 Data protection....... 36 Cleaning and servicing .... 36 Cleaning the tub ...... 36 Cleaning products ...... 37 Tips on appliance care.... 37...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. ▶ Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! ¡ An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶... -
Page 8: Risk To Children
en Safety ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. Risk to children WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. - Page 9 Safety en ▶ Keep children away from the appliance when open. The wa- ter in the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid. WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves.
-
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en To prevent corrosion, do not use AquaSensor ▶ sponge cloths on dishwashers The AquaSensor is an optical meas- with a stainless steel front or uring device (light barrier) which rinse such cloths thoroughly measures the turbidity of the rinsing several times before using them water. -
Page 12: Installing And Connecting The Appliance
en Installation and connection ¡ Operating instructions Drainage connection ¡ Installation Instructions Connect your appliance to drainage ¡ Further information documents connection so dirty water is dis- ¡ Installation material charged via the wash cycle. ¡ Inlet hose ¡ Mains cable Installing the drainage connection ¡... -
Page 13: Electrical Connection
Installation and connection en Electrical connection Connect your appliance to the power supply. Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instruc- tions" → Page 4. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 53. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 "Switching on the appliance" → Page 30 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme buttons Display The display shows information about the remain- ing running time or the basic settings.
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Programmes Programme: Programme sequence Additional func- tions Tableware: Most economical pro- → "Additional ¡ Cleaning mixed table- gramme: Eco 50° ware and cutlery. ¡ Pre-Rinse functions", Level of soiling: Page 19 ¡ Cleaning 50 °C ¡ Removing common ¡ Intermediate rinse household food remnants ¡... -
Page 19: Additional Functions
Additional functions en Save Favourite on the Additional func- appliance. tion Press . ¡ Switch on with mixed loads containing table- Press the right programme button. IntensiveZone ware with different soil- → "Programmes", Page 17 ing levels, e.g. place Press the button for the relevant very soiled pots and additional function. -
Page 20: Top Basket
en Features Raise or lower the basket evenly to Top basket the right level. Arrange cups, glasses and small → "Basket heights", Page 22 items of tableware in the top basket. Check that the basket is level on both sides. You can adjust the height of the top Slide the basket back in. -
Page 21: Cutlery Basket
Features en Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. -
Page 22: Basket Heights
en Before using for the first time Push the lever forwards and fold To use the prongs again, fold them down the prongs . back up. a The prongs audibly click into posi- tion. Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery basket Setting Top basket... -
Page 23: Water Softening System
Water softening system en Tip: You can change these settings Water softening system Water softening system and other "Basic settings" → Page 33 at any time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank and parts of the appliance may become blocked. -
Page 24: Special Salt
en Water softening system Press repeatedly until the Note: Only use special salt for right water hardness has been set. dishwashers. Do not use salt tablets. The value H04 is set at the factory. Do not use table salt. To save the settings, press Add the special salt to the dis- for 3 seconds. -
Page 25: Rinse Aid System
Rinse aid system en erally only be used up to a water Press the catch on the lid of the hardness of 26 °E without adding dispenser for rinse aid and lift special salt. . ¡ The water hardness is 0 - 8 °E. You do not need to use special salt. -
Page 26: Switching The Rinse Aid System Off
en Detergent a The display shows . Detergent Detergent Press repeatedly until the display shows the value set at Detergent the factory r05. Suitable detergents Press repeatedly until the right amount of rinse aid has been Only use detergents that are suitable set. -
Page 27: Unsuitable Detergents
Detergent en and rinse aid. For the best washing Detergent Description and drying results we recommend fault and is non-critical if using special salt and rinse aid from you remember the follow- a water hardness of 17 °E. If you are ing: using combined detergent, the wash- ¡... -
Page 28: Adding Detergent
en Tableware ¡ To prevent sticking, only touch de- Close the lid of the detergent dis- tergents in a water-soluble pouch penser. with dry hands and only ever place them in a dry detergent dispenser. ¡ Even if the rinse aid and special salt refill indicators light up, wash- ing programmes will run properly with combined detergents. -
Page 29: Damage To Glass And Tableware
Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out... -
Page 30: Removing Tableware
en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 31: Setting Additional Functions
Basic operation en a The remaining running time of the ¡ You can only change a pro- programme appears on the dis- gramme when running if you can- play. cel it. → "Terminate programme", Setting additional functions Page 32 ¡ The appliance switches off auto- You can set additional functions to matically 1 minute after the end of complete the washing programme... -
Page 32: Terminate Programme
en Basic operation Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Press for approx. ▶ 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "0h:01m"... -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 34: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 35. The following settings are possible: ¡ With the setting "rc0", the func- tion is permanently deactivated. ¡ With the setting "rc1", the func- tion can be selected via the button. -
Page 35: Home Connect Quick Start
Home Connect en The Home Connect app guides you With the help of the Home Connect through the entire login process. Fol- App scan the QR code. low the instructions in the Home Con- nect app to configure the settings. Tips ¡ Please consult the documents sup- plied by Home Connect. -
Page 36: Remote Diagnostics
en Cleaning and servicing Press . ¡ Security certificate of the Wi-Fi ▶ communication module (to ensure If you open the appliance door, the a secure data connection). function is automatically deactiv- ¡ The current software and hardware ated. version of your appliance. button lights up. -
Page 37: Cleaning Products
Cleaning and servicing en Cleaning filters Cleaning products Soiling in the dishwashing water may Only use suitable cleaning products block the filters. to clean your appliance. After each wash check the filters → "Safe use", Page 10 for residue. Tips on appliance care Turn the coarse filter anticlockwise and remove the filter system ... -
Page 38: Cleaning Spray Arms
en Cleaning and servicing Press the locking catches Cleaning spray arms gether and lift the coarse filter out Limescale and soiling in the dish- . washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ... -
Page 39: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 40 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Unscrew the water connection. ately or indicator for water Remove the filter from the supply supply lights up. hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 41: Washing Results
Troubleshooting en Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. A different error code ap- A technical fault is present. - Page 42 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 43 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 44 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 26. ing time of the tab is not at- tained.
- Page 45 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 26. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 46 en Troubleshooting Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 47 Troubleshooting en Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 48: Home Connect Problem
en Troubleshooting Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶ work is not established. ive. nection of your router. WLAN display is flashing. Connection to home net- Activate the wireless network con- ▶... -
Page 49: Mechanical Damage
Troubleshooting en Fault Cause Troubleshooting Water is left in the appliance Programme has not yet Wait until the programme ends or ▶ at the end of the pro- ended. cancel the programme with Reset. gramme. → "Terminate programme", ▶ Page 32 Appliance cannot be Software update is taking Wait until the software update has ▶... -
Page 50: Noise
en Troubleshooting Fault Cause Troubleshooting Appliance door cannot be Door cannot be closed due Check whether the appliance has ▶ closed. to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin- ets or the worktop. -
Page 51: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 52: Protect Appliance From Frost
en Transportation, storage and disposal Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 53: Customer Service
Customer Service en Fuse 10 - 16 A Customer Service Customer Service Water pressure ¡ Min. 0.05 MPa (0.5 bar) If you have any queries, are unable to Customer Service ¡ Max. 1 MPa rectify faults on the appliance your- (10 bar) self or if your appliance needs to be repaired, contact Customer Service. - Page 54 Directive 2014/53/ respective appliance. A detailed RED Declaration of Con- formity can be found online at www.siemens-home.bsh-group.com Declaration of Conformity Declaration of Conformity among the additional documents on the product page for your appliance.
- Page 56 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001594788* 9001594788 (010709) 642 V1...