Jøtul F 602 ECO IT Installation And Operating Instructions Manual page 9

Fig. 5 Attach the heat shield
1. Screw the heat shield to the underside of the product, with
the screw included in the bag of screws.
Fig. 6 Mount the smoke outlet on the top outlet
1. Tighten the smoke outlet with the screws that are screwed
into the product from the factory.
4.3 Assembly with an external air
supply (optional extra)
Fig. 7 Loosen the screws for the external air supply
cover.
1. The screws to be used for the external air supply cover
are mounted in the oven from the factory. These must be
loosened and used as shown in Fig. 9 if fresh air supply is
to be used.
Fig. 8 Installation of gasket on the external air supply
cover
1. Remove the protective paper from the supplied gasket and
place the gasket in the slot on the external air supply air
cover.
ENGLISH
9