Assembly Instructions; Floor Stand - Scan Optics SO-5000 User Manual

SO-5000 Ophthalmic Microscope

FLOOR STAND

1. Remove the pillar, base and clamp mount from the case or carton.
2. Insert the pillar into the hole. Tighten the two grubscrews using the 5mm socket key found in
the tool kit to fix the pillar in place. Refer to figure 1 (A), (B).
3. Remove the clamp mount from the case or carton and place it on the pillar. Tighten the two
grubscrews to fix the clamp mount in place. Refer to figure 1 (C), (D).
ISSUE NUMBER: 5.0
DATE: 11/04/02

ASSEMBLY INSTRUCTIONS

A
C
Figure 1 Assembling the floor stand
SUPERSEDES: 4.0
DATE: 22/05/01
User Manual
WRITTEN BY:
DATE: 22/08/97
Page 5 of 36
B
D
RJK CHECKED BY:
DATE: 22/08/97
NW