Introduction - Scan Optics SO-5000 User Manual

SO-5000 Ophthalmic Microscope
Please read the following information carefully before installing and using the Scan Optics Ophthalmic
microscope. Scan Optics is responsible for the safety, reliability and performance of the equipment
only if it is used in accordance with these instructions.
This microscope is designed for use by a certified practitioner, for magnified observation of patients,
and for use in an operating theatre as an observation aid during surgery. A sample of this product has
tested as compliant to IEC 60601-1 for use at 110V and 200-260V, 10-40°C, and 60-95% relative
humidity.
Environmental storage and packing conditions of 60-95% relative humidity and 10-40 °C, are
recommended for this product.
No parts or accessories supplied with this microscope are supplied in a sterile condition.
Apart from those instructions within this manual, there are no user-serviceable parts in this
microscope. Scan Optics will retain the discretion to advise whether any repairs may be taken out by
external qualified technical personnel, or whether part(s) of the microscope must be returned to the
manufacturer's premises for service or repairs to be carried out under warranty or otherwise. Where
appropriately qualified technical personnel are identified by a user, and ratified by Scan Optics, then
Scan Optics will make available on request any information which will assist in repairing the
equipment.
ISSUE NUMBER: 5.0
DATE: 11/04/02
User Manual

INTRODUCTION

SUPERSEDES: 4.0
DATE: 22/05/01
WRITTEN BY: RJK
DATE: 22/08/97
Page 3 of 36
CHECKED BY: NW
DATE: 22/08/97