Attaching The Camera Adapter; Disassembling The Camera Adapter - Scan Optics SO-5000 User Manual

SO-5000 Ophthalmic Microscope

ATTACHING THE CAMERA ADAPTER

1. Remove the protective plastic cap on the trinocular attachment (B) by unscrewing the
fasteners located on either side.
2. Attach the photo tube (C) on the trinocular attachment as shown and secure by screwing the
fasteners back in.
3. Carefully insert the photo eyepiece (D) into the photo tube. Note that the photo eyepiece
must be removed from the photo tube if the assembly is to be transported.
4. Attach the photomicro adapter (E) to the photo tube and secure by tightening the knob on the
bottom of the adapter.
5. Attach the camera (F) on the top of the photomicro adapter.
6. Attach the Vari-Magnifinder and/or remote cord as required.

DISASSEMBLING THE CAMERA ADAPTER

1. To disassemble the photographic apparatus, simply perform the steps above in reverse. Note
that the photo eyepiece must be removed from the photo tube when the apparatus is
dismantled.
2. Take care to ensure that protective caps provided with the components (e.g. photo tube,
trinocular attachment) are replaced after use.
ISSUE NUMBER: 5.0
DATE: 11/04/02
User Manual
SUPERSEDES: 4.0
DATE: 22/05/01
WRITTEN BY: RJK
DATE: 22/08/97
Page 29 of 36
CHECKED BY: NW
DATE: 22/08/97