Table of Contents
Advertisement
Chapter 3. Basic functions introduction
◎ Appearance
◎ LCD Display
No.
Name
❶
Door
❷
Control panel
❸
Scrap receptacle
❹
USB slot (Type A)
❺
USB Slot (Type B)
❻
Power Switch
❼
Power slot
❽
Paper sensor
Function
Press the button to open the front door
Four hard-key and one mono LCM to control and monitor
the condition of the printer
Clean it up periodically before full of scraps in the receptacle
Connect with designated device of HiTi products. Do not
charge with hand-held devices.
To be connected with PC for transferring data
Switch "On" to operate, and switch "Off" when finishing
using the printer. Do not switch off the printer while the
printer is still running.
To be connected with AC power (110V~240V)
Place the paper core properly and stretch the paper to
designated position until the sensor lights
10
Advertisement
Table of Contents
