Axis Q3515-LVE User Manual page 9

AXIS Q35 Network Camera Series
Configure your device
1. Go to Video > Installation > Image correction.
2. Turn on Straighten image.
3. Use the controls to adjust the image.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
1. Go to Video > Privacy masks.
2. Click
3. Click the new mask and type a name.
4. Adjust the size and placement of the privacy mask according to your needs.
5. To change the color for all privacy masks, click Privacy masks and select a color.
See also
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
• Adjust the trade-off between noise and motion blur. Go to Video > Image > Exposure and move the Blur-noise trade-off
slider toward Low noise.
• Set the exposure mode to automatic.
Note
A high max shutter value can result in motion blur.
• To slow down the shutter speed, set max shutter to the highest possible value.
• If possible, open the aperture.
• Reduce sharpness in the image, under Video > Image > Appearance.
The illustration shows before and after an image has been straightened.
.
9