Axis Q3515-LVE User Manual page 15

AXIS Q35 Network Camera Series
Configure your device
Set up network storage
To store recordings on the network, you need to set up your network storage.
1. Go to System > Storage.
2. Click
3. Type the IP address of the host server.
4. Type the name of the shared location on the host server under Network share.
5. Type the username and password.
6. Select the SMB version or leave it on Auto.
7. Select Add share even if connection fails if you experience temporary connection issues, or if the share is not yet
configured.
8. Click Add.
Add audio to your recording
Turn on audio:
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
4. If you make any changes to the input source, click Apply changes.
Edit the stream profile that is used for the recording:
5. Go to System > Stream profiles and select the stream profile.
6. Select Include audio and turn it on.
7. Click Save.
Record and watch video
Record video directly from the camera
1. Go to Video > Image.
2. To start a recording, click
If you haven't set up any storage, click
network storage on page 15
3. To stop recording, click
Watch video
1. Go to Recordings.
2. Click
Add network storage under Network storage.
.
again.
for your recording in the list.
and . For instructions on how to set up network storage, see Set up
15