Gateway E-3600 System Manual page 82

Start the BIOS Setup utility by restarting the computer, then pressing F1 when
the Gateway logo screen appears during startup. The Main BIOS Setup utility
screen opens. It may not look exactly like the screen shown below.
Maintenance
As you select items on the Main menu or in submenus, you see specific
information related to the current selection in the Item Specific Help box.
The command bar shows the keystrokes necessary to access help, navigate
through the menus, and perform other functions.
I F1 opens the Help screen, providing general help for using the BIOS Setup
utility.
The ↑ (up arrow) and ↓ (down arrow) keys select items in the menu.
I
The ← (left arrow) and → (right arrow) keys move you between the
I
menus.
I E either moves you to a submenu screen when a selected item is
NTER
preceded by > or activates a selected field.
I E closes the screen you are in and returns you to the previous screen
SC
or opens a dialog box allowing you to exit from the BIOS Setup utility.
I F10 opens a screen that lets you save all settings, then exit the BIOS Setup
utility.
74
Using the BIOS Setup Utility
BIOS Setup Utility
Main Advanced
AMI BIOS Version : XX.XX.XX
BIOS Build Date : XX/XX/XX
BIOS ID : XXXXXXXX
Processor Type : Pentium III(tm)
Processor Speed : 800MHz
System Memory : 128 MB
System Time : [XX:XX:XX]
System Date : [Thu XX/XX/XXXX]
Security Power Boot
← → Select Screen
↑ ↓Select Item
- + Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Exit