Chapter 5
•
Wireless Radio
enabled or disabled.
•
Name(SSID)
•
Mode
- The current wireless mode which the router works on.
•
Channel
- The current wireless channel in use.
•
Channel Width
•
MAC Address
•
WAN
- This field displays the current settings of the WAN, and you can configure them
on the
Network
>
WAN
•
MAC Address
•
IP Address
or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet
connection.
•
Subnet Mask
•
Default Gateway
Dynamic IP as the internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
•
DNS Server
•
System Up Time
- The length of the time since the router was last powered on or
reset.
Click
Refresh
to get the latest status and settings of the router.
5 2
Operation Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Operation
Mode.
3. Select the working mode as needed and click Save.
- Indicates whether the wireless radio feature of the router is
- The SSID of the router.
- The current wireless channel width in use.
- The physical address of the router.
page.
- The physical address of the WAN port.
- The current WAN (Internet) IP Address. This field will be blank
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System) server.
Configure the Router in WISP Mode
Renew
or
Release
here to
72