Wireless Advanced - TP-Link TL-WR840N User Manual

Chapter 7
Done!
7 4 4

Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Wireless
3. Configure the advanced settings of your wireless network and click Save.
2 Go to Wireless >
3 Click Enable to enable the Wireless MAC Filtering function.
4 Select Allow the stations specified by any enabled entries in
the list to access
5 Delete all or disable all entries if there are any entries already.
6 Click Add New and fill in the blank.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B / 00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save and click Back.
7 The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Advanced.
Configure the Router in Range Extender Mode
Wireless MAC Filtering.
as the filtering rule.
in the Status drop-down list.
150