Reboot - TP-Link TL-WR840N User Manual

Chapter 6
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
¾ To backup configuration settings:
Click Backup to save a copy of the current settings in your local computer. A ".bin" file
of the current settings will be stored in your computer.
¾ To restore configuration settings:
1. Click Choose File to locate the backup configuration file stored in your computer, and
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
6 6 5

Reboot

Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
¾ To reboot the router manually:
Click Reboot, and wait a few minutes for the router to rebooting.
> Backup & Restore.
> Reboot, and you can restart your router.
Configure the Router in Access Point Mode
141