Local Management; Remote Management - TP-Link TL-WR840N User Manual

Chapter 5
4. Click Blocked DoS Host List
5 8 3

Local Management

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Security > Local
accessing the router.
For example, if you want to allow PCs with specific MAC addresses to access the router's
Web-based Utility locally from inside the network, please follow the instructions below:
1 ) Select Only the PCs listed can browse the built-in web pages to perform
Administrator
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
MAC addresses can use the password to browse the Web-based Utility to
perform administrator tasks.
3 ) Click Set, and your PC's MAC address will also be listed.
4 ) Click Save.
Note:
If your PC is blocked but you want to access the router again, reset the router to the factory defaults.
5 8 4

Remote Management

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Security >
remote device via the internet.
to display the DoS host table by blocking.
Management, and you can block computers on the LAN from
tasks.
Remote Management, and you can manage your router from a
Configure the Router in WISP Mode
100