Cembre MG3A Operation And Maintenance Manual page 9

4.8) Printing cycle
Ensure there is a genuine printable medium correctly positioned on the template then:
– Set the data in the program, proceed via Print Setup to Print Preview (Consult user manual) then press F6 to start the
printing cycle; the carriage will close then gradually open again automatically, until it stops fully open at the end of the
cycle, with the sheet printed.
– Remove printed sheet and continue loading/print preview/printing cycle.
4.9) MARKINGENIUS media - examples of applications.
MG-TAPW LEGENDS
High quality printing of fonts and
graphics suit a wide range of ap-
plications including component
identification, rating plates and
signage. Reference data may
also be printed on the counter-
foil to assist installation.
MG-TPM CABLE TAGS
High quality thermal transfer
printing typically allows more
characters to be accommo-
dated than ink based systems.
Reference data may also be
printed on the stems and sprues
to assist installation.
MG-CPM TERMINAL BLOCK MARKERS
Single
A stem of printed markers is removed,
complete, from the sheet, and the
markers fitted onto the terminal blocks
without removal from the stem.
Modular
A strip of printed, joined markers is
removed from the sheet.
Individual MG-TAPW legends are
simply and precisely remo-
ved from partially printed sheets
for immediate use, leaving no ob-
structions to prevent the remain-
der of the sheet being printed.
Transparent PM tag holders may
be pre-fitted before removing
the tags from the sheet.
The stem is carefully detached from
the mounted markers.
The strip is fitted onto the termi-
nal blocks.
Alternatively, fully printed sheets
are easily divided into strips.
Individual tags or strips of printed
tags are easily removed from the
sheet for immediate use.
. 9 .
Example of an MG-TAPW legend
mounted on RTR-TAPW rail with a
transparent RT-CCWS cover.
Example of an MG-TPM tagin
a PM holder mounted on a
single core cable.
The long life print is perfectly
protected against chemical and
atmospheric degradation.
The group of terminal blocks is
quickly and easily marked.
The group of terminal blocks is
quickly and easily marked.