Telephone Base Alert Tones - VTech IS 8121-3 User Manual

• On when the handset
is in use, or when the
answering system
is answering an
IN USE incoming call.
4
light • Flashes when there is
an incoming call, or
another telephone
sharing the same line
is in use.
• Press to delete the
message currently
playing.
X /
• Press twice to delete
DELETE
all old messages
when the telephone is
not in use.
• Press to skip a
/ SKIP
message.
5
• Press to repeat a
/ message.
REPEAT • Press twice to play the
previous message.
• Press to start or stop
message playback.
/
• During call screening,
PLAY/
press to temporarily
STOP
turn the call screening
on or off.
• Press to turn the built-
ANS ON
6 in answering system
on or off.
7 Antenna
• Light on when the
• Light flashes when the
CELL 1 /
8 CELL 2
Lights
• Press to connect the
• Press and hold to add
• Press to page all
9 FIND HS

Telephone base alert tones

1 short • Plays at the end of each
beep message playback.
Beeps • Message alert tone is
every 10 on and there are new
seconds messages.
• Call screening is on and
the answering system is
1 long about to
beep • record a message.
• Plays at the end of all
messages playback.
30
telephone base is
paired and connected
with a Bluetooth
device.
telephone base is in
discoverable mode.
paired cell Bluetooth
device.
or replace a Bluetooth
device.
system handsets.