ASROCK Z690M PG RIPTIDE/D5 User Manual page 82

P-Core PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
E-Core PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Ring PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
System Agent PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Memory Controller PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
GT PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
AVX Configuration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Configuration
P-Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
74