Crossfire Tm Operation Guide; Installing Two Crossfire Tm -Ready Graphics Cards - ASROCK Z690M PG RIPTIDE/D5 User Manual

TM
2.9 CrossFire Operation Guide
This motherboard supports CrossFire
PCI Express x16 graphics cards.
1. You should only use identical CrossFire
certified.
2. Make sure that your graphics card driver supports AMD CrossFire
Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD's website for details.
4. If you pair a 12-pipe CrossFire
operate as 12-pipe cards while in CrossFire
5. Different CrossFire
Please refer to AMD graphics card manuals for detailed installation guide.
2.9.1 Installing Two CrossFire
CrossFire Bridge
TM
that allows you to install up to two identical
TM
-ready graphics cards that are AMD
TM
Edition card with a 16-pipe card, both cards will
TM mode.
TM
cards may require different methods to enable CrossFire
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
Z690M PG Riptide/D5
TM technology.
TM
.
27