Table of Contents
Advertisement
6.
Slide the depth pointer so that the pointer indi-
cates "0" on the scale.
► 1 . Depth pointer
7.
Adjust the cutting depth by pulling up the stopper
pole while pressing the feed button.
1
2
► 1 . Stopper pole 2. Feed button
8.
To perform fine adjustment of the cutting depth,
turn the dial on the stopper pole so that it indicates "0".
1
► 1 . Dial
9.
Turn the head of the stopper pole to obtain the
desired depth. To increase the depth, turn the head
counterclockwise. To decrease the depth, turn the head
1
clockwise.
1
► 1 . Head of the stopper pole
10. Tighten the stopper pole fixing nut.
► 1 . Fixing nut
11. Release the fixing lever.
► 1 . Fixing lever
8 ENGLISH
1
1
Advertisement
Table of Contents
