Table of Contents
Advertisement
Storage
NOTICE
Failure to store with sprayer with Pump Armor will
result in operational problems the next time you spray.
Always circulate Pump Armor through the sprayer
after cleaning. Water left in the sprayer will corrode
and damage the pump.
1. Dilute 4 oz. of Pump Armor with an additional 4 oz.
of water in material cup.
ti15442a
2. Thread cup into sprayer, put prime/relief valve to UP
position and squeeze sprayer trigger for approxi-
mately 10 seconds.
ti14999a
3. Reverse spray tip to UNCLOG position, put
prime/relief valve DOWN to spray position, and aim
sprayer into waste area. Pull trigger for 1-2 seconds.
ti14991a
16
4 oz
ti15418a
ti15425a
ti15418a
4. Properly dispose of used Pump Armor mixture from
material cup and rinse cup with water.
5. Store sprayer indoors in a cool, dry place. Store in
an upright position only.
ti15001a
ti15438a
3A1456A
Storage
Advertisement
Table of Contents
