5.5.8.4 Advanced
•
In the Power Properties dialog box, open the Advanced tab.
Allow Suspend With
This menu allows you to specify whether or not your unit will enter Suspend Mode while it
is operating with an active PPP connection, network interface or active TCP/IP connection.
Low Power Warnings
The sliding scale at the bottom of this menu allows you to specify the remaining battery ca-
pacity at which a warning message is displayed on the Omnii screen, from 0% to 20%.
5.5.8.5 Built-in Devices
•
In the Power Properties dialog box, open the Built-in Devices tab.
Draft 1
Psion Teklogix Omnii Hand-Held Computer User Manual
Chapter 5: Configuration
Power Properties
119