Chapter 5: Configuration
Stylus Properties
5.5.10 Stylus Properties
Note: Touchscreen calibration may not be enabled on your unit. If your screen appears to
require recalibration, contact your supervisor.
•
In the Control Panel, choose the Stylus icon.
5.5.10.1 Double-Tap
•
In the Double-Tap menu, follow the directions to tailor the sensitivity of the stylus when
you tap on the touchscreen.
5.5.10.2 Calibration
Touchscreens rarely require recalibration. However, if your touchscreen has never been cal-
ibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow
the directions below.
•
Choose the Calibration tab, and then tap on the Recalibrate button.
130
Psion Teklogix Omnii Hand-Held Computer User Manual
Draft 1