Advertisement
3.0 APPLIANCE DATA - CONTINUED
Contact details
Focal Point Fires Ltd, Avon Trading Park, Christchurch Dorset, BH23 2BT
4.0 UNPACKING THE APPLIANCE
Read all the instructions before continuing to unpack or install this appliance. Carefully lift the appliance from the carton. Check
that the contents correlate with the component checklist below. Please dispose of all packaging with care at your local recycling
centre.
5.0 COMPONENT CHECKLIST
QUANTITY
1
1
6.0 OPERATING THE APPLIANCE
Check that the fan outlet is not covered or obstructed in any
way, and ensure the power to the fire is switched on.
The controls are concealed behind the front door of the
appliance.
1
Thermostat
2
Flame effect dimmer
3
Flame effect on/off
4
900W Heater
5
900W Heater
OPERATION INSTRUCTIONS
•
Insert the plug into the mains socket and switch on
•
Open the front door of the appliance
•
Select the desired functions:
-
Flame/fuel effect on/off (3)
-
Low heat setting 900W (3 + 4)
-
High heat setting 1800W (3 + 4+ 5)
-
Heating and Flame effect (1 + 2 + 3 + 4 + 5)
•
Increase or decrease the flame intensity by turning the flame dimmer control knob (2) clockwise or anti-clockwise
rotates.
•
Rotate the thermostat control knob (1) clockwise or anti-clockwise to increase or decrease the desired room
temperature setting.
•
Notice: The heater will only work if the flame switch (3) is on and the thermostat is set above the current room
temperature.
DESCRIPTION
Stove and heater assembly
User instruction booklet
Other control options
Room temperature control with
presence detection
Room temperature control with
open window detection
With distance control option
With adaptive start control
With working time limitation
With black bulb sensor
4
GB IE
No
No
No
No
No
No
©
2021 Focal Point Fires Ltd.
Advertisement
