e3: Flash Cntrl for Built-in Flash
Choose the flash mode for the built-in flash.
Option
r TTL
s Manual
Repeating
t
flash
Commander
u
mode
Manual
Choose a flash level between Full and 1/128 (
full power, the built-in flash has a Guide Number of 12/39 (m/ft, ISO
100, 20 °C/68 °F).
Repeating Flash
The flash fires repeatedly while the shutter is
open, producing a strobe-light effect. Press 4
or 2 to highlight the following options, 1 or
3 to change.
Option
Output
Choose flash output (expressed as a fraction of full power).
Choose the number of times the flash fires at the selected
output. Note that depending on shutter speed and the
Times
option selected for Frequency, the actual number of flashes
may be less than selected.
Frequency
Choose how often the flash fires per second.
Flash output is adjusted automatically in response to
shooting conditions.
Choose the flash level. The camera does not emit
monitor pre-flashes.
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect.
Use the built-in flash as a master flash controlling
remote optional flash units in one or more groups
(0 303).
G button
A Custom Settings menu
Description
1
/
of full power). At
128
Description
U
301