e3: Flash Cntrl for Built-in Flash
Choose the flash mode for the built-in flash.
Option
1 TTL
2 Manual
3 Repeating flash
Commander
4
mode
A
Flash Control Mode
The flash control mode for the built-in flash is
shown in the information display.
A
"Manual" and "Repeating Flash"
Y icons blink in the control panel and viewfinder when these options
are selected.
A
The SB-400
When an optional SB-400 flash unit is attached
and turned on, Custom Setting e3 changes to
Optional flash, allowing the flash control mode
for the SB-400 to be selected from TTL and
Manual (Repeating flash and Commander
mode options are not available).
Flash output is adjusted automatically in response to
shooting conditions.
Choose the flash level (0 284).
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect (0 284).
Use the built-in flash as a master flash controlling
one or more remote optional flash units (0 285).
G button
A Custom Settings menu
Description
U
283