Nikon D800E User Manual page 438

AF-assist illuminator does not light:
• AF-assist lamp does not light if AF-C is selected for autofocus mode
(0 91). Choose AF-S. If an option other than auto-area AF is selected for
AF-area mode, select center focus point (0 96).
• The camera is currently in live view or a movie is being recorded.
• Off selected for Custom Setting a8 (Built-in AF-assist illuminator)
(0 286).
• Illuminator has turned off automatically. Illuminator may become hot
with continued use; wait for lamp to cool down.
Flicker or banding appear during live view or movie recording: Choose an option for
Flicker reduction that matches the frequency of the local AC power
supply (0 329).
Bright bands appear during live view or movie recording: A flash or other light
source with brief duration was used during live view or movie recording.
Noise (bright spots, randomly-spaced bright pixels, fog, lines, or reddish areas) appears in
photos:
• To reduce randomly-spaced bright pixels, fog, or lines, choose lower ISO
sensitivity or use high ISO noise reduction (0 109, 277).
• To reduce bright spots, randomly-spaced bright pixels, or fog at shutter
speeds slower than 1 s or to reduce reddish areas and other artifacts in
long time-exposures, enable long exposure noise reduction (0 277).
• Turn Active D-Lighting off to avoid heightening the effects of noise
(0 175).
Photos are blotched or smeared:
• Clean lens.
• Clean low-pass filter (0 394).
Colors are unnatural:
• Adjust white balance to match light source (0 145).
• Adjust Set Picture Control settings (0 163).
Can not measure white balance: Subject is too dark or too bright (0 157).
n
414