Q
Connections
Connecting to a Computer
This section describes how to use the supplied UC-E14 USB cable
to connect the camera to a computer.
Before Connecting the Camera
Before connecting the camera, install the software on the supplied
ViewNX 2 installer CD. To ensure that data transfer is not
interrupted, be sure the camera EN-EL15 battery is fully charged. If
in doubt, charge the battery before use or use an EH-5b AC
adapter and EP-5B power connector (available separately).
Supplied Software
ViewNX 2 includes a
Your Imaging Toolbox
"Nikon Transfer 2" function for
copying pictures from the
camera to the computer,
where ViewNX 2 can be used
to view and print selected
images or to edit photographs and movies. Before installing
ViewNX 2, confirm that your computer meets the system
requirements on page 242.
Q
239