E3: Flash Cntrl For Built-In Flash; E3 Flash Cntrl For Built-In Flash - Nikon D7200 Menu Manual

e3: Flash Cntrl for Built-in Flash

Choose the flash mode for the built-in flash.
Option
1
TTL
2
Manual
3
Repeating flash
4
Commander mode
❚❚ Manual
Choose a flash level. Flash level is stated in fractions of full
power: at full power, the built-in flash has a Guide Number of 12/
39 (m/ft, ISO 100, 20°C/68°F).
❚❚ Repeating Flash
The flash fires repeatedly while the
shutter is open, producing a strobe-
light effect. Press 4 or 2 to highlight
the following options, 1 or 3 to
change.
Option
Choose flash output (expressed as a fraction of full power).
Output
Choose the number of times the flash fires at the selected
output. Note that depending on shutter speed and the
Times
option selected for Frequency, the actual number of flashes
may be less than selected.
Frequency Choose how often the flash fires per second.
G button ➜ A Custom Settings menu
Flash output is adjusted automatically in
response to shooting conditions.
Choose the flash level. The camera does not
emit monitor pre-flashes.
The flash fires repeatedly while the shutter is
open, producing a strobe-light effect.
Use the built-in flash as a master flash
controlling remote optional flash units in one or
more groups (0 84).
Description
Description
83
Menu Guide