e3: Flash Cntrl for Built-in Flash
Choose the flash mode for the built-in flash.
Option
TTL
1
(default)
2 Manual
Repeating
3
flash
Commander
4
mode
A
"Manual" and "Repeating Flash"
Y icons blink in the control panel and viewfinder when these options are
selected.
A
The Shooting Information Display
The flash control mode for the built-in flash can be
viewed in the shooting information display
(pg. 189).
A
The SB-400
When an optional SB-400 flash unit is attached
and turned on, Custom Setting e3 changes to
Optional flash, allowing the flash control mode
for the SB-400 to be selected from TTL and
Manual (Repeating flash and Commander
mode options are not available).
Flash output is adjusted automatically in response to
shooting conditions.
Choose the flash level (pg. 310).
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect (pg. 310).
Use the built-in flash as a master flash controlling
one or more remote optional flash units (pg. 311).
Description
U
309