Nikon D800E User Manual page 216

A
Using FV Lock with the Built-in Flash
FV lock is only available with the built-in flash when TTL is selected for
Custom Setting e3 (Flash cntrl for built-in flash, 0 301).
A
Using FV Lock with Optional Flash Units
FV lock is also available with optional flash units in TTL and (where
supported) monitor pre-flash AA and monitor pre-flash A flash control
modes. Note that when commander mode is selected for Custom
Setting e3 (Flash cntrl for built-in flash, 0 301), you will need to set
the flash control mode for the master or at least one remote group to
TTL or AA.
A
Metering
The metering areas for FV lock when using optional flash unit are as
follows:
Flash unit
Stand-alone flash unit
Used with other flash
units (Advanced
Wireless Lighting)
A
See Also
For information on using the depth-of-field preview button or A AE-L/
AF-L button for FV lock, see Custom Setting f5 (Assign preview button,
0 315) or Custom Setting f6 (Assign AE-L/AF-L button, 0 315).
l
192
Flash mode
i-TTL 6-mm circle in center of frame
Area metered by flash exposure
AA
i-TTL
AA
Area metered by flash exposure
A (master
flash)
Metered area
meter
Entire frame
meter