Subaru Forester 2018 Manual page 81

Conventional Cruise Control
(2) Switch to Conventional Cruise Control.
Press and hold the
or longer to switch from Adaptive Cruise Control to Conventional Cruise Control. A
buzzer sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
To set the ready status:
- All doors (except the rear gate/trunk) are closed.
- The driver's seatbelt is fastened.
- The select lever is in the
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The vehicle speed is over approximately 25 MPH (40 km/h).
- Parking brake is released.
(3) Control the accelerator pedal to reach the desired speed.
80
(following distance setting) switch for approximately 2 seconds
S02085
D position, and the paddle shift is not operated.
(Conventional Cruise Control) is displayed.
S01351