Subaru Forester 2018 Manual page 80

How to use the Conventional Cruise Control
Conventional Cruise Control can be set when the following conditions are met.
- The select lever is in the
- The brake pedal is released.
- The vehicle speed is between approximately 25 MPH (40 km/h) and 90 MPH (145
km/h).
- Parking brake is released.
■ Setting Conventional Cruise Control
(1) Setting the Conventional Cruise Control to standby status.
Press the
following distance setting indicator are displayed on the EyeSight display area of the
combination meter display. The set vehicle speed display will read "- - MPH".
When the
Adaptive Cruise Control.
If the (CRUISE) switch is pressed once more, the EyeSight display will turn off. It will
also automatically turn off when the engine is stopped.
D
position and the paddle shift is not operated.
(CRUISE) switch. At this time,
(CRUISE) switch is pressed, the initial cruise control mode is always
S02083
Conventional Cruise Control
(Adaptive Cruise Control) and the
S01333
79