Throwing Light on Your Subject: The
The flash can be adjusted for a variety of situations, as described in the table
on the following page under the heading, "When to use it."
To change the flash setting, press the
setting is displayed in the control panel or monitor.
Press
Sensitivity (ISO Equivalency)
The built-in Speedlight is able to adjust output for correct flash exposure at
sensitivity settings equivalent to ISO 400 or less. We recommend that you set
sensitivity (ISO equivalency) to AUTO or to a fixed value of 400 or less when
using the flash (
For more information on:
iii Safe flash use
82
96).
Button
button repeatedly until the desired
Flash setting displayed in control
panel and monitor