Television Playback: Connecting Your Camera To A Video Device - Nikon COOLPIX 5000 Manual

Television Playback
Using the EG-E5000 audio/video cable provided with your camera, you can con-
nect the COOLPIX5000 to a television or VCR. The video device will show the
same picture as is displayed in the camera monitor.
1
Connect the EG-E5000 to the camera
Insert the black plug on the EG-E5000 into the
camera's A / V OUT connector.
2
Connect the EG-E5000 to the video device
Connect the yellow plug to the video-in jack on
the television or VCR. Connect the white plug
to the audio-in jack.
3
Tune the television to the video channel
4
Turn the camera on
The television will mirror the image in the camera monitor. Note that if the
monitor is rotated to face the same direction as the lens or stowed face out
on the camera body, the image in the monitor will be inverted. Television
playback will not be affected.
Use an AC Adapter
To prevent the display in the television from turning off whenever the camera
enters sleep mode, connect the camera to an EH-21 AC adapter/battery charger
(available separately). Note that camera settings and photo info will not be
displayed on the television screen when the camera monitor is off.
Choosing a Video Mode (
The Video Mode item offers a choice of NTSC and PAL standards for video
output. Be sure that the standard selected matches that of any video device
to which you connect the camera.
PAL Video Mode (
At a setting of PAL, the monitor will turn off when an audio/video cable is con-
nected. During recording at settings of Ultra HS or Movie, however, the
monitor will turn on and output to the video device will be suspended.
178
Connecting Your Camera to a Video Device
155)
155)