Nikon COOLPIX 5000 Manual page 27

G The Zoom Button
Use the zoom button to frame photographs. Press
the end of the button labeled
to zoom out from your subject, increasing the area
visible in the final photograph. Press
photo) to zoom in, enlarging small or distant ob-
jects to fill the frame.
When an image is displayed in full-screen review (
( 158), pressing
59, 159). Press
press ( ) to display images as small "thumbnails" that allow up to four
or nine images to be viewed simultaneously (
During movie playback, the zoom button controls playback volume (
H The Command Dial
The command dial is used for a variety of opera-
tions: to select options in the shooting menu, to
page through photo information and thumbnail
images in playback or quick review, and to set shut-
ter speed and/or aperture when shooting in User
Set 1, 2, or 3. In
mand dial is used in combination with the
tons to adjust the camera settings shown in the table following. Some of these
operations can only be performed when User Set 1, 2, or 3 is selected.
Situation
Camera in
(User Set 1, 2, 3)
Exposure mode
(User Set 1, 2, 3)
Exposure mode
(User Set 1, 2, 3)
(for wide angle)
( ) zooms in on the image displayed in the monitor (
to cancel zoom. In
(shooting) mode, the com-
Operation
mode
+
(tele-
58) or full-frame playback
(playback mode) and quick review,
60, 160).
, , ,
Function
Exposure mode selection
Select combination of shutter
speed and aperture
Select shutter speed
164).
, and but-
89
91
92
13 13