Viewfinder Ready-Light Warnings; Infrared Photography - Nikon N2000 Instruction Manual

VIEWFINDER READY·L1GHT WARNINGS
In both programmed TTL auto and TTL auto flash photography,
the viewfinder ready-light blinks to warn of improper film selec-
tion, poor connection between camera and flash unit, or
underexposure possibility. To prevent the viewfinder ready-light
from blinking:
1) Use film with ISO range of ISO 25 to tODD.
2) Keep flash unit and camera electrical connections clean.
3) Make sure the subject is within the
automatic shooting
range ' and, if
necessary, set lens to wider aperture.
*See your flash unit instruction manual.
INFRARED PHOTOGRAPHY------...;.
An appropriate filter is needed for infrared photography, such as
R60, etc.
1. Focus subject.
2. Note the focused distance on the lens that is aligned with the
distance index.
3. Then reset the focusing ring to align the focused distance
with the infrared focusing index.
4. Attach filter and take the shot.
29