Chapter 5 Dip Switch - Planet WGT-705A User Manual

There is a DIP switch for the setting on copper and fiber port.
Refer to the table below for more details.
On
Switch 1
Off
On
Switch 2
Off

NOTE:
4
Fiber is Forced Mode
Fiber is Auto-Negotiation
LLR enable
LLR disable
1. Be sure the opposite end is using the
same setting (forced or Auto-negotia-
tion). And when using two converters
at the same time, the two converters
MUST set to forced mode.
2. When using two converters, don't en-
able the both device's LLR function at
the same time.
Chapter 5
DIP SWITCH