Problems Uploading Data; Problems Uploading Data - Neuropace 5106 Manual

Remote monitor
Hide thumbs Also See for 5106:
Table of Contents

Advertisement

Problems Uploading Data

Problems Uploading Data

Not Connected to Wi-Fi or Wi-Fi Turned off
Problem
Possible
Causes
What to
Do
What to
Do
46
The following message appears on the Home screen:
Your remote monitor is not connected to Wi-Fi.
The Wi-Fi on your remote monitor is turned off.
Your Internet router or gateway has a problem.
Touch the Wi Fi button at lower
left of the Home screen.
If Wi-Fi is turned off (the On/Off
button is at upper right of the
Wireless Network Connection
screen), then turn it back on. It
should be left on. Proceed to the
next step.
Touch the Wi Fi button at lower left of the Home screen.
If Wi-Fi is turned off (the On/Off button is at upper right of the Wireless
Network Connection screen), then turn it back on. It should be left on. Proceed
to the next step.
Select an available network and touch Connect and enter the Wi-Fi password
if required. Refer to
connect to Wi-Fi, your data will be uploaded automatically.
If the previous steps do not resolve the problem, check that your Internet router
or gateway is turned on and its cables are properly connected.
Select an available network and touch
Connect and enter the Wi-Fi password
if required. Refer to
on page 22
connect to Wi-Fi, your data will be
uploaded automatically.
If the previous steps do not resolve the
problem, check that your Internet router
or gateway is turned on and its cables
are properly connected.
Connect to Wi-Fi on page 22
Connect to Wi-Fi
for details. Once you
for details. Once you

Advertisement

Table of Contents
loading

Table of Contents