Neuropace 5106 Quick Reference Manual

NeuroPace, Inc.
455 N. Bernardo Ave.
Mountain View, CA 94043
Customer Support
866-726-3876
www.NeuroPace.com
THE RNS® SYSTEM
Quick Reference
Guide
Remote Monitor Model 5106
Before using the remote monitor, be sure to read the entire NeuroPace® Remote Monitor Manual for related instructions, warnings,
and cautions. Images in this document are representative and may vary in detail from what a particular user experiences.
PARTS OF THE NEUROPACE®
REMOTE MONITOR
The remote monitor tablet comes
with its power cord (AC adapter)
and a wand.
Remote
Monitor
Tablet
Power Cord
(AC adapter)
(1 or 2 Pieces)
Wand
© 2023 NeuroPace, Inc. All rights reserved. | DN 1019079 Rev. 4 | Rev. Date: 2023-08 | Remote Monitor Model 5106 Quick Reference
SET UP THE REMOTE MONITOR
1
Locate an area:
• Near an electrical outlet that matches the power cord plug
that came with your remote monitor
• In range of your Wi-Fi network
• Away from small children and pets who can damage the
wand and remote monitor
• Away from large electrical appliances
• Away from water, moisture or dampness, and temperatures
below 32°F or above 95°F
2
If your power cord comes as two
separate pieces, connect the two
pieces before connecting the device
to the outlet.
Plug one end of the power cord into
the remote monitor and the other
end into an electrical outlet.
3
Locate the USB port on your remote
monitor tablet. Plug the wand cord
into the USB port.
Remote Monitor Model 5106 Quick Reference
NeuroPace® Patient Materials
1