Table of Contents
Advertisement
Get Data from Your Neurostimulator
When you get data from your neurostimulator, observe the wand signal to confirm proper
placement of the wand and that there are no large sources of EMI that may affect data collection.
Refer to
Understanding Signal Level and Quality on page 32
and Immunity on page 48
1
Turn on the remote monitor: Press the hardware power button.
After checking for software updates, the Home screen appears.
2
Place the cupped side
of the wand over the
neurostimulator and
rest the wand on the
scalp. It should be no
more than about 1 inch
away from the center
of the neurostimulator.
For best results keep
the wand directly over
the neurostimulator.
for more information.
Get Data
Button
Data Status
Wi-Fi
Button
Cupped side
of Wand
and
Electromagnetic Emissions
Settings
Button
The location of your
neurostimulator may vary.
The Wand placed over
the Neurostimulator
Power
Button
27
Advertisement
Table of Contents
