Neuropace 5106 Manual page 11

Remote monitor
Hide thumbs Also See for 5106:
Table of Contents

Advertisement

Caution: Remote Monitor Tablet
DO NOT use the tablet for any other purpose
except as instructed. The tablet is designed
to operate only as part of the remote monitor.
DO NOT make any changes or adjustments to
the tablet hardware or software. This includes
attaching external devices like a mouse. Any
changes you make that are not part of the
instructions may damage the remote monitor
and may not allow you to send data to the
PDMS database.
Caution: Data Collection
You should collect data from the
neurostimulator as directed by your doctor.
If connected to a Wi-Fi network, the remote
monitor sends data automatically to the
PDMS database. NeuroPace recommends you
collect data from the neurostimulator at least
once a day and maintain a Wi-Fi connection
to allow data to be sent the PDMS database
automatically. By receiving your data on a
regular basis, your doctor will be able to
identify problems and make adjustments. Your
doctor will also be able to determine when
battery power is getting low. If you do not
collect data as directed, your doctor may not be
able to review your data and make adjustments
on a timely basis.
If you are having seizures more frequently or
with greater severity, talk with your doctor
as soon as possible. Your doctor may ask
you to collect data on a more frequent
basis until adjustments can be made to the
neurostimulator settings.
Talk to your doctor about what you should
do if you are unable to collect data from your
neurostimulator as directed.
Caution: operating Temperatures
DO NOT use the wand or tablet in temperatures
above or below the recommended operating
range (32°F - 95°F). The wand or tablet may
not operate properly at temperatures below
32°F or above 95°F. These devices may also
become warm during normal operation. DO
NOT use them when the room temperature is
above 95°F to avoid discomfort.
Remote Monitor Manual Model 5106
Caution: Remote Monitor Setup
DO NOT set up the remote monitor where
people can trip over the cords. The cords
may be tripping hazards, especially for small
children and pets. Tripping over the cords may
damage the remote monitor parts, and may
result in bodily injury. DO NOT rest anything
on the power cord. DO NOT plug the wand
into equipment other than the remote monitor
because it could damage the wand. DO NOT
use a USB cable extension from the remote
monitor to the wand.
DO NOT move the remote monitor to another
location without first disconnecting the
parts and storing them in the carrying case.
Disconnect the wand and all cords from the
tablet. You may damage the parts if you do not
disconnect them before moving them.
Caution: Heating
The remote monitor's AC adapter may become
hot during normal operation. Use care when
handling during or immediately after operation.
9

Advertisement

Table of Contents
loading

Table of Contents