Indications For Use; Purpose Of Your Remote Monitor - Neuropace 5106 Manual

About the RNS® System

INDICaTIoNS FoR USE

Refer to your RNS® System Patient
Manual for the indications for use. For a
complete discussion of indications for use,
contraindications, warnings, cautions, and
potential side effects, talk to your doctor.
The RNS® System Patient Manual
has a cover that looks like this.

PURPoSE oF YoUR REMoTE MoNIToR

The NeuroPace® Remote Monitor (5106) is
designed for use with the RNS® Neurostimulator
(models RNS-300M and RNS-320).
A remote monitor lets you collect data from
the neurostimulator and automatically sends
the data to your doctor. The remote monitor
consists of a special software program installed
on a tablet computer, a wand, and accessories.
After connecting the hand-held wand to the
tablet, data in the neurostimulator are collected
by placing the wand over the neurostimulator.
The wand uses Radio Frequency (RF)
communication to collect the data. Data are
stored in the tablet and then sent to a secure
database. The database is called the PDMS
(Patient Data Management System) and your
doctor can access your data. Your doctor will
review the data and use the results to adjust the
neurostimulator settings during future office
visits.
IMPoRTaNT INFoRMaTIoN
Please see your RNS® System patient manual
for additional information regarding the RNS®
System and treatment.
You must be willing to collect data from the
neurostimulator as directed by your doctor.
If connected to a Wi- Fi network, the remote
monitor sends data automatically to the PDMS
database. NeuroPace recommends you collect
data from the neurostimulator at least once
a day and maintain a Wi-Fi connection to
allow data to be sent to the PDMS database
automatically.
13