Connecting To A Computer - Nikon D2X User Manual

Connecting to a Computer

The supplied UC-E4 USB cable can be used to connect the camera to a com-
puter. Once the camera is connected, PictureProject can be used to copy
photographs to the computer, where they can be browsed, viewed, and
retouched. The camera can also be used with Nikon Capture 4 version 4.2
or later (available separately), which supports batch processing and more ad-
vanced image editing options and can be used to control the camera directly
from the computer.
Before Connecting the Camera
Install the necessary software after reading the manuals and reviewing the
system requirements. To ensure that data transfer is not interrupted, be sure
the camera battery is fully charged. If in doubt, charge the battery before use
or use an EH-6 AC adapter (available separately).
Before connecting the camera, set the USB option
in the setup menu (
puter operating system and whether the camera
is being controlled from Nikon Capture 4 version
4.2 or later (available separately) or photographs
are being transferred to the computer using Pic-
tureProject:
Operating system
Windows XP Home Edition
Windows XP Professional
Mac OS X
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Mac OS 9
* Do select PTP. If PTP is selected when the camera is connected, the Windows
NOT
hardware wizard will be displayed. Click Cancel to exit the wizard, and then discon-
nect the camera. Be sure to select Mass storage before reconnecting the camera.
Data Transfer and Camera Control
216) according to the com-
PictureProject
Choose PTP or
Mass Storage
Mass Storage
Not supported
Transfer
Choose
*
Nikon Capture 4
Camera Control
Choose PTP
231