Nikon D2X User Manual page 222

Custom Setting f6: Setting Method for Buttons and Dials
This option allows adjustments that are normally
made by holding a button and rotating a com-
mand dial to be made by rotating the command
dial after the button is released. Highlight f6 But-
tons and dials in the second level of the CSM
menu ( 178) and press the multi selector to the
right. Press the multi selector up or down to highlight an option, then press
to the right to make a selection.
Option
Default Changes to settings made by rotating command dial while button is held
(default) down.
Settings can be changed by rotating command dial after button is released.
To exit, press button again, press shutter-release button halfway, press
Hold
,
ed for Custom Setting c3 or optional adapter is used) wait for about 20 s.
Custom Setting f7: Disable Shutter If No CF Card
This option can be used to enable the shutter
re lease when no memory card is inserted in the
cam era. Note that when photographs are being
cap tured to a computer using Nikon Capture 4
Cam era Control, pho to graphs are not recorded to
the cam era mem o ry card and the shutter release
will be en abled re gard less of the setting chosen
for this option.
Highlight f7 No CF card? in the second level of the CSM menu (
press the multi selector to the right. Press the multi selector up or down to
highlight an option, then press to the right to make a selection.
Option
On
(default) Shutter-release button disabled when no memory card is inserted.
Off Shutter-release button enabled even when no memory card is inserted.
208
, , ISO, QUAL, or WB button, or (except when No limit is select-
Description
Description
,
178) and