York J10ZJ Instruction Manual page 63

When the "Cancel" button is pressed multiple times to exit each menu level and the screen returns to the first "Status, Alarms" dis-
play the next demonstration can begin. In this demonstration the information below steps through the "Commissioning" menu.
"Startup Delay" screen. Move Joystick. Scroll
down to "Details" then press "ENTER".
Then Press "ENTER".
These few pages provide a simple demonstration how to navigate the menu's of the Smart Equipment™ con-
Johnson Controls Unitary Products
- After the start-up countdown is
- Scroll down to "Htg" and
press "ENTER".
Clg
>Htg
ENTER
CANCEL
JOY +
- C PWR
select "Htg-En".
To change the selection move the joystick to the right and choose either "YES" or "NO".
Screen Will
Flash
Update
>Details
ENTER
CANCEL
"Setup and Service" will now appear.
Press "ENTER".
>Setup
Service
Press Enter
ENTER
CANCEL
press "ENTER" to
>Htg-En
#HtgStgs
Press Enter
ENTER
CANCEL
JOY +
- C PWR
Htg-En
No
ENTER
CANCEL
JOY +
5167530-JIM-H-0218
Press Enter
JOY +
- C PWR
Press Enter
JOY +
- C PWR
- C PWR
63