Table of Contents
Advertisement
Quick Links
WARNING: The GF6900 Bedside Assist Rail is intended for homecare use. Ensure you
have read and understood the following safety information before installing or using the
Bedside Assist Rail. If you do not understand any part of these warnings, cautions or
instructions, contact a healthcare professional for direction in the use of this product. If
the Assist Rail is not properly installed and adjusted, personal injury and damage to the
Assist Rail and bed could result.
WARNING: DO NOT push or pull the bed by the Bedside Assist Rail.
WARNING: If components are damaged or missing, contact your GF authorized
distributor immediately. DO NOT use substitute parts. Use only Lumex replacement
parts. The use of non-Lumex replacement parts could cause personal injury, damage to
the Bedside Assist Rail, and void the warranty.
WARNING: California Proposition 65 WARNING: This product contains a chemical
known to the State of California to cause cancer and reproductive or developmental
harm.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper installation or use of this product.
WARNING: Entrapment may occur. The bed frame and its components, including the
mattress, bed side rails, head and foot board, bedding, and any accessories added to the
bed, can all affect the risk of entrapment. Thorough patient assessment and monitoring
are necessary to reduce the risk of entrapment, including establishing whether the use of
a bed rail is in the best interest of the patient. Patients most vulnerable to entrapment are
those who are frail, confused, restless, or who have uncontrolled body movement. Read
and understand the following bed rail decal before use:
INTENDED USE
The Bedside Assist Rail is intended to provide support, increase stability, and assist the user
when repositioning themself in bed.
WARNING: The Bedside Assist Rail is not intended to prevent a patient from accidentally
rolling out of bed. The Bedside Assist Rail is not intended as a restraint device. DO NOT
use the Bedside Assist Rail as a restraint.
WARNING: The Bedside Assist Rail used in conjunction with a bed can assist an
individual weighing up to 300 lb. The Assist Rail is NOT designed to support the total
body weight of an individual. Use it for assistance ONLY.
GF6900-INS-LAB-RevA16
GF6900: BEDSIDE ASSIST RAIL
INSTALLATION AND OPERATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
1
Advertisement
Table of Contents
Related Manuals for Graham Field LUMEX GF6900
Summary of Contents for Graham Field LUMEX GF6900
- Page 1 GF6900: BEDSIDE ASSIST RAIL INSTALLATION AND OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE USE WARNING: The GF6900 Bedside Assist Rail is intended for homecare use. Ensure you have read and understood the following safety information before installing or using the Bedside Assist Rail.
- Page 2 ASSEMBLY AND INSTALLATION Handle Remove all components from box. Rail Strap Each box should include the following End Bar components (see picture at right). Description Quantity Front Bar L Bar End Bar Handle Bar Rail Strap E Clip E Clip Front Bar L Bar Installation...
- Page 3 Mounting on Bed Handle 1. Locate a convenient distance from the head of the bed to position Bedside Assist Rail. 2. Place Rail Support Frame between the box spring and the mattress with the Handle at desired position. 3. Secure Bedside Assist Rail Rail Frame Secure Rail Support...
- Page 4 WARRANTY SCOPE OF WARRANTY GF Health Products, Inc. (“GF”) warrants to the original purchaser only that it will replace or repair components, at GF’s sole discretion, that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals, including proper use and maintenance.
Need help?
Do you have a question about the LUMEX GF6900 and is the answer not in the manual?
Questions and answers