Table of Contents
Advertisement
Serial ATA3 Connectors
(SATA_0)
(see p.6, No. 18)
(SATA_1)
(see p.6, No. 19)
(SATA_2)
(see p.6, No. 20)
(SATA_3)
(see p.6, No. 21)
USB 3.2 Gen1 Header
(19-pin USB3_3_4)
(see p.6, No. 6)
OCuLink Connectors
(OCU1)
(see p.6, No. 44)
(OCU2)
(see p.6, No. 15)
CPU HP-SMBus
Connector
(5-pin CPU1_HSBP1)
(see p.6, No. 49)
Clear CMOS Pads
(CLRMOS1)
(see p.6, No. 39)
30
SA TA_0
SA TA_1
SA TA_2
SA TA_3
1
O CU2
O CU1
1
GND
P0_HP_ALERT_L
CPU_HP_SDA
CPU_HP_SCL
+3V
These four SATA3 connectors
support SATA data cables for
internal storage devices with
up to 6.0 Gb/s data transfer
rate.
Besides four default USB 3.2
Gen1 ports on the I/O panel,
there is one USB 3.2 Gen1
header on this motherboard.
This USB 3.2 Gen1 header
can support two USB 3.2 Gen1
ports.
Please connect PCIE SSDs to
these connectors.
This header is used for the hot
plug feature of HDDs on the
backplane.
This allows you to clear the
data in CMOS. To clear CMOS,
take out the CMOS battery and
short the Clear CMOS Pad.
Advertisement
Table of Contents
